环氧树脂地坪为什么表面不平整的原因:
Why the surface of epoxy resin floor is uneven:
1、环氧树脂地坪施工中杂质混入;
1Impurities in the construction of epoxy resin floor;
2、地面不平整,起伏过大或施作地坪规格太薄;
2The ground is not flat, the fluctuation is too large or the scale is too thin;
3、材料涂布时,已部分反应,粘度过大,甚至产生硬块;
3When the material is coated, it has been partially reacted with excessive viscosity and even hard block;
4、施工中断料,来不及衔接。
4Construction interruption material, too late to connect.
环氧树脂地坪为什么表面不平整的预防方法:
Why the surface of epoxy resin floor is uneven:
1、环境力求清洁,石英砂选择颗粒均匀者;
1Clean the environment, and the quartz sand selects the evener;
2、地面处理平坦,并清洁干净,凹处须修补,附着物需铲除,依实际情况选做适当规格地坪;
2The ground shall be smooth and clean, and the concave shall be patched, and the attachment shall be removed, and in accordance with the actual conditions, the floor shall be duly made.
3、地坪材料前后涂布,须在可使用时间衔接完毕。以免超过使用时间,材料粘度过大而无法自然流平,或桶内残存部分涂料产生少许硬块,此时应更换新桶。
咨询热线:1832201940117702238171
联系人:许经理
公司网址:.shengjingdp.com
联系我时,请说是在2018信息港看到的,谢谢!